Imagine if there is no connector will be like? In this case, the circuits should be permanently connected by a continuous conductor. For example, the electronic device should be connected to the power supply. The two ends of the connecting cable must be fixed to the electronic device and the power supply by some method (such as soldering). As a result, a lot of inconveniences have arisen both for production and for use.

Take LED landscape lamp for example. The distance from the power supply to the lamp holder is generally large, if from the power supply to the lamp holder is connected from start to finish every line, it will bring unnecessary trouble to the construction, and will cause the wire to waste. Some people may wonder, open a gap directly from the FireWire, the wire conductive parts received together, and then wrapped a few layers of insulating adhesive can not do? Not necessarily use the connector. First of all, most of the insulating tapes are easy to be aged and have potential safety hazard. Secondly, the mechanical properties of the connectors which are directly wired together are very poor. A slight vibration and stretching of the circuit can easily lead to circuit breakage, and poor contact of the interface can easily cause heat and cause a fire In addition, the outdoor environment is harsh, waterproof, salt-resistant and anti-aging requirements are relatively high, and the adhesive can not meet the requirements far. However, the use of high-performance waterproof connectors in outdoor lighting not only simplifies the installation of the power grid but also reduces the potential safety hazard to a very low level. Kunshan connector

This example simply shows the benefits of the connector. It makes design and manufacturing processes more convenient, more flexible, more secure, and also reduces production and maintenance costs. The appearance of the connector to improve the production process Connector simplifies the assembly process of electronic products, but also simplifies the mass production process is easy to repair If an electronic component failure, with connectors can quickly replace the failure of components, easy to upgrade As technology advances, With connectors, you can update components and replace them with new, more complete components. Increased design flexibility. Connectors enable engineers to design and integrate new products and to build components with components Greater flexibility.

Especially for industrial connectors, sometimes used in harsh environments that require plugging and unplugging, flexibility and security are even more important. This time with snap-in simple plug connector will be a wise choice.