Connector, CONNECTOR. Domestic also known as connectors, plugs and sockets. Generally refers to the electrical connector. That is connected to the two active devices, devices, transmission current or signal. Connector brands Garnett, New York, Toshiba, Molex and so on. FPC connector

Connectors are a type of component that our electronic engineers often come into contact with. Its role is very simple: in the circuit is blocked or isolated barrier between the circuit, set up a bridge of communication, so that the current flow, so that the circuit to achieve the intended function. Connector is an indispensable part of electronic devices, along the current flow path observation, you will always find one or more connectors. Connector form and structure is ever-changing, with the application object, frequency, power, application environment, there are different types of connectors. For example, the lighting of the stadium connector and the hard drive connector, and the rocket ignition connector is very different. But no matter what kind of connector, must ensure that the current flow smoothly and reliably circulation. In terms of general terms, the connector is not only connected to the current, in the rapid development of optoelectronic technology today, the optical fiber system, the signal carrier is transmitted light, glass and plastic instead of the wires in ordinary circuits, but the optical signal Connectors are also used in the pathways, and they function the same as the circuit connectors.

Imagine if there is no connector will be like? In this case, the circuits should be permanently connected by a continuous conductor. For example, the electronic device should be connected to the power supply. The two ends of the connecting cable must be fixed to the electronic device and the power supply by some method (such as soldering). As a result, a lot of inconveniences have arisen both for production and for use. Take a car battery as an example. Assuming that the battery cable is fixed and welded to the battery, the car manufacturer adds more workload to the battery and increases the production time and cost. Battery damage needs to be replaced, but also to the car to the depot, removal of the old demolition, and then welded on the new, to pay more labor costs. With the connector, you can save yourself a lot of trouble by buying a new battery from the store, disconnecting the connector, removing the old battery, installing a new battery, and reconnecting the connector. This simple example illustrates the benefits of the connector. It makes design and manufacturing processes more convenient and flexible, reducing production and maintenance costs.